Kadıoğlu MX15EKO Electric Heated Deck Walnut Dryer

Kadıoğlu MX15EKO Model Walnut Drying Machine has a multi-layered structure inside. Heaters and fan system in MX15EKO Model works with 380V industrial electricity.

Working Principle:

The machine has a multi-layered structure inside. Each layer takes a certain amount of walnuts. The crop is loaded from the top of the machine with the help of a conveyor belt and the heater and fan are operated. First, the crop on the bottom layer, which comes into contact with dry air, dries. When the crop on the bottom layer dries, this layer is evacuated and the crops remaining on the upper layers are taken to the lower floor one layer at a time. New walnuts are loaded to the emptied top layer again with a conveyor belt. Walnut transition between layers is easily realized in seconds thanks to the easily openable and closeable covers.

Advantages:

• Since it has a multi-layered structure, heated high-pressure air comes into contact with walnuts in high tonnage. In this way, it helps drying with low energy consumption.
• Since it has a high structure, it takes up very little space on the horizontal plane according to the tonnage it dries.
• The top floor has a mixer. In this way, the humid air rising from the lower floors is easily removed from the machine.
• Each floor is mixed during the transition between floors. In this way, there is no need to mix each floor.

Work volume and duration:

The 3-storey structure has a work volume of 5000 Liters. The 3-storey MX15EKO Model dries an average of 2000 - 2500 kg of walnut in a single pass. Excluding the initial drying of the first floor, it dries 650 - 850 kg of walnut in 15-20 hours. (The walnut may change due to internal humidity rate, external humidity rate, etc.)